[Burst] - Panasonic Lumix DMC-LS85 Operating Instructions Manual

For details on [REC] menu settings, refer to P21.
When you press and hold the shutter button several pictures are taken in succession.
Applicable modes: 4 1 5
Burst speed
(pictures/second)
Number of
recordable
pictures

The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
• When the burst mode setting is set to [ # ]
– The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
– You can take pictures until the capacity of the built-in memory or the card is full.
• The focus is fixed when the first picture is taken.
• When the burst speed is set to [ & ], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to [ # ],
they are adjusted each time you take a picture.
• When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
• If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
• The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
• Burst Mode is not cancelled when the camera is switched off.
• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
• In Burst Mode, the flash setting is fixed to Forced flash OFF [ o ].
• Burst Mode cannot be used [HI-SPEED BURST] and [STARRY SKY] in [SCENE MODE].
Advanced-Shooting
& [BURST]
[OFF]
—
—
h
—
8
&

3
Max. 4
Max. 7
-  -
#
Approx. 2
Depends on the remaining
capacity of the built-in
memory/card.