3
1: Close the battery door or the card
door.
2: Slide the battery door or the card
door to the end and then close it
firmly.
• If the card door cannot be completely closed,
remove the card, check its direction and
insert it again.
Note
• Before removing the card or batteries, turn the camera off, and wait until the status
indicator has gone off completely. (Otherwise, this unit may no longer operate normally
and the card itself may be damaged or the recorded pictures may be lost.)
• Remove the batteries after use. Batteries may heat up soon after you start using the unit.
Turn the camera off and wait until the battery temperature decreases before removing
them.
• Always use 2 new batteries of the same type when replacing batteries.
Preparation
- 1 -