Selecting A Single Picture And Printing It - Panasonic Lumix DMC-LS85 Operating Instructions Manual

2
Press e / r to select [PictBridge(PTP)], and then
press [MENU/SET].
Note
• We recommend placing a soft cloth under this unit to prevent scratching.
• Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC6PP
for DMC-LS85PU/DMC-LS86PU, DMW-AC6E for DMC-LS85EG/DMC-LS85EP: optional:
P110).
• Before inserting or removing a card, turn the camera off, and disconnect the USB
connection cable.
• You cannot switch between the built-in memory and the card while the camera is
connected to the printer. Disconnect the USB connection cable, insert (or remove) the
card and then connect the USB connection cable to the printer again.
1
Press w / q to select the picture and then press
[MENU/SET].
• A message displays for about 2 seconds.
2
Press e to select [PRINT START] and then press
[MENU/SET].
• Refer to P105
to print the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Connecting to other equipment

Selecting a single picture and printing it

for the items which can be set before starting
- 10 -
USB MODE
PLEASE SELECT
THE USB MODE
SELECT SET
PictBridge 8
M
100-0001
1/19
PLEASE SELECT
THE PICTURE TO PRINT
MULTI PRINT
SELECT PRINT
SINGLE SELECT
PRINT START
PRINT WITH DATE
OFF
NUM.OF PRINTS 1
PAPER SIZE
PAGE LAYOUT
SELECT SET
CANCEL