Panasonic Lumix DMC-LS85 Operating Instructions Manual page 26

- [LCD MODE]
• High Angle Mode is cancelled if you turn the camera off. (Same occurs in [POWER
SAVE].)
• The LCD monitor automatically returns to normal brightness after 30 seconds when
recording in Power LCD mode. Press any button to make the LCD monitor bright again.
• The brightness of the pictures displayed on the LCD monitor is adjusted when Power
LCD Mode or High Angle Mode is activated. Therefore, some subjects may look different
on the LCD monitor. However, this does not affect the recorded pictures.
• If the screen is difficult to see because of light from the sun etc. shining on it, use your
hand or another object to block the light.
• The number of recordable pictures decreases when the Auto Power LCD, Power LCD or
High Angle Mode is used.
• [AUTO POWER LCD] or [HIGH ANGLE] cannot be selected in the Playback Mode.
m [DISPLAY SIZE]
• Refer to P45 for details.
Preparation
Makes the LCD monitor easier to see.
[OFF]: Suitable for normal use.
x [AUTO POWER LCD]:
The brightness is adjusted automatically depending
on how bright it is around the camera.
c [POWER LCD]:
The LCD monitor becomes brighter and easier to
see even when taking pictures outdoors.
y [HIGH ANGLE]:
The LCD monitor is easier to see when
taking picture with the camera held high
above your head.
The icons on the screen are displayed in large size for
easy viewing.
[STANDARD]/[LARGE]
-  -