Table of Contents
Advertisement
Preset Download Function
The Preset Download function automatically copies the tuning
position of all available TV stations into the VCR's memory
when you connect the VCR using a fully-wired 21-pin Scart
cable to a TV equipped with the Q Link function.
To Simultaneously Set Up this VCR with a
New TV
Perform the following operation steps exactly as described to
ensure that the Preset Download function works correctly.
First of all, make sure that the VCR is switched off.
√
1
Switch the TV on.
The TV starts to tune all available TV stations and to
adjust the clock.
(This is called Auto Setup function.)
When the TV has finished its
√
own auto setup, the VCR is
automatically switched on, and
the downloading of the setup
data from the TV to the VCR
starts. (Applicable to TVs with
"Q Link" or "DATA LOGIC"
function)
If your TV is equipped with the
"Easy Link", "Megalogic" or
"SMARTLINK"
function,
Country setting menu appears
on the TV screen before
downloading. Press the Cursor
buttons (3421)
to select
the desired country. Then,
press the OK button
downloading automatically
starts.
The VCR's Auto Setup (Downloading) is complete when
√
the programme position and the current time appear in
the VCR display.
Note:
≥ If you accidentally switch on the VCR before the TV,
downloading of the setup data from the TV may not be
performed correctly. In this case, follow the operation steps
below.
1
Wait until the Auto Setup is complete on both the TV and
the VCR.
2
Press the MENU button
menu on the TV screen.
3
Press the Cursor buttons (3421)
"Tuning" and then "Download".
4
Press the OK button
data from the TV to the VCR starts.
5
When the programme position and the current time
appear in the VCR display, downloading is complete.
On Screen Display
Download
Download in
progress,
please wait.
Position
67
Indication during downloading
Country
Polska
Deutschland
others
Česká Rep.
the
Magyarország
Menu for Country setting
and the
VCR display
SP
CVC
Programme
Indication when the
position
current time is 16:45
to display the OSD Main
to select
twice. Downloading of the setup
Hint:
≥ If you use a Panasonic TV and perform the operation step
1, starting the downloading of the setup data will
automatically display the "Download" indication. However,
in case of a TV of another make, the "Download" indication
may not appear. In this case, select the AV input on your
TV if you want to see the "Download" indication.
To Set Up this VCR with a TV Already in
Use
1
Switch the TV on.
2
Select the AV input on your TV.
3
Set the VCR/TV switch
4
Press the VCR-ON/OFF button
to switch the VCR on.
Downloading of the setup data
starts automatically.
(Applicable to TVs with
"Q Link" or "DATA LOGIC"
function)
If your TV is equipped with the
"Easy Link", "Megalogic"or
"SMARTLINK" function, the
Country setting menu appears
on the TV screen before
downloading. Press the Cursor
buttons (3421)
to select
the desired country. Then,
press the OK button
downloading automatically
starts.
When the programme position
√
and the current time appear in
the VCR display, the VCR's
Auto Setup (Downloading) is
complete.
to "VCR".
Download
Download in
progress,
please wait.
Position
67
Indication during downloading
Country
Deutschland
Polska
Česká Rep.
others
Magyarország
Menu for Country setting
and the
SP
CVC
Programme
Indication when the
position
current time is 16:45
9
Advertisement
Table of Contents
