To Select The Recording Duration And Perform Timer Recording (Otr Recording) - Panasonic NV-SJ412EE Operating Instructions Manual

Video cassette recorder nv-sj412ee
Table of Contents

Advertisement

To Prevent Accidental Erasure of Recorded
Contents
When you record again onto a previously
recorded video cassette, the previous
recording is automatically erased and
replaced with the new recording.
Therefore, to prevent accidental
erasure of the recorded contents,
break out the erasure prevention
tab after recording.
Use a screwdriver or similar tool to break out the tab.
To Record Again onto the Video Cassette with a Broken
Out Erasure Prevention Tab:
If you insert a video cassette with a
broken out erasure prevention tab and
press the REC button
indication flashes on the VCR display to
indicate that recording is not possible.
In this case, cover the tab hole with two
layers of adhesive tape.
The adhesive tape substitutes for the prevention erasure tab
and makes it possible to record again on this cassette.
To Select the Recording Duration
and Perform Timer Recording
(OTR Recording)
OTR means One-Touch Recording and is called this way,
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
To Perform an OTR Recording:
1
Display the VCR picture on the TV.
2
Insert a video cassette with an intact erasure prevention
tab.
3
Press the Channel button
position on which the TV programme to be recorded will
be broadcast.
4
Press the REC/OTR button
5
Press the REC/OTR button
desired recording duration.
≥ Every time you press this button, the recording
duration indicated in the VCR display changes in the
following order.
≥ For example, if you select "30", the VCR records a
programme from that moment on for 30 minutes.
Counter display
(normal recording mode)
240
(min.)
To Stop the OTR Recording Before the End:
Press the Stop button
Note:
≥ This function also works during Direct TV Recording.
16
Erasure prevention tab
, the "1"
Adhesive tape
to select the programme
to start recording.
repeatedly to select the
30
60
(min.)
(min.)
180
120
(min.)
(min.)
.

Advertisement

Table of Contents
loading

Table of Contents