Panasonic NV-SJ412EE Operating Instructions Manual page 32

To Change the Type of Video System
(Colour TV system)
1 Press the MENU button T to display the Main menu on
the TV screen.
2 Press the Cursor buttons (3421) Q to select
"Tuning" and "Manual" in this order.
3 Press the OK button S to display the list of tuned TV
stations.
4 Press the Cursor buttons (3421) Q to select the TV
station for which you want to change the type of video
system.
5 Press the OK button S to display the Manual Tuning
menu.
6 Press the Cursor buttons
(3421) Q to select the entry
field for "Video system".
7 Press the Cursor buttons (34)
Q to select "AUTO".
The VCR automatically distinguishes between
PAL,SECAM/MESECAM signals. If the picture lacks
colour, press the Cursor buttons (34) Q to change the
type of video system "PAL" or "MESECAM".
PAL: For receiving PAL signals.
MESECAM: For receiving SECAM/MESECAM signals.
8 Press the OK button S to conclude the setting.
9 Press the EXIT button R to exit the On Screen Display.
To Change the Audio System
1 Press the MENU button T to display the Main menu on
the TV screen.
2 Press the Cursor buttons (3421) Q to select
"Tuning" and "Manual" in this order.
3 Press the OK button S to display the list of tuned TV
stations.
4 Press the Cursor buttons (3421) Q to select the TV
station for which you want to change the type of video
system.
5 Press the OK button S to display the Manual Tuning
menu.
6 Press the Cursor buttons
(3421) Q to select the entry
field for "Audio mode".
7 Press the Cursor buttons (34)
Q to select the desired Audio
mode.
BG: PAL B.G.H/SECAM B.G
DK: PAL D/SECAM D.K.K1
I: PAL I
8 Press the OK button S to conclude the setting.
9 Press the EXIT button R to exit the On Screen Display.
32
To Facilitate the Following Operations with the
Instruction Indications on the On Screen
Display
≥ To delete a programme position
≥ To insert a blank programme position
≥ To move a TV station to another programme position
Use the coloured instruction indications displayed below the
list of tuned TV stations and the corresponding coloured
buttons.
If downloading of the setup data has been performed, only
the instruction indication "Delete" appears.
1
2
Tuning
3
Pos : 5
Name : BR3
Channel : 18
Fine tuning : AUTO
Decoder : OFF
4
Video system : AUTO
Audio mode : BG
5
6
7
Hint:
≥ If you have performed Manual Tuning to enter TV stations,
Tuning
Pos : 5
Name : BR3
Channel : 18
Fine tuning : AUTO
Decoder : OFF
Video system : AUTO
Audio mode : BG
Press the MENU button T to display the Main menu on
the TV screen.
Press the Cursor buttons (3421) Q to select
"Tuning" and "Manual" in this order.
Press the OK button S to display the list of tuned TV
stations.
Press the Cursor buttons
(3421) Q to select
the desired TV station.
Follow the operations below.
To delete a programme position (Delete):
Press the Channel button (J, red) :.
To insert a blank programme position (Add):
Press the DATE button (i, green) ;.
To move a TV station to another programme position
(Move): Press the ON button (i, yellow) G,
and then use the Cursor buttons (34) Q
to select the new programme position to
which you want to assign the TV station.
Press the OK button S to conclude the setting.
Press the EXIT button R to exit the On Screen Display.
the "– –" indication may appear under "Pos/Name" on the
On Screen Display when programming a ShowView timer
recording.
5 BR3 18
16 POS16 83
6 RB3 3
17
7 SFB3 36 p p p p p p p p
18
8 SW3 29 p p p p p p p p
19
9 WDR3 17
p p p p p p p p
20
10 MDR3 32 p p p p p p p p
Delete Add Move
Indications for Delete, Add
and Move