To Simultaneously Set Up This Vcr With A New Tv - Panasonic NV-HS960EE Operating Instructions Manual

Preset Download Function
The Preset Download function automatically copies the tuning
position of all available TV stations into the VCR's memory
when you connect the VCR using a fully-wired 21-pin Scart
cable to a TV equipped with the Q Link function.
To Simultaneously Set Up this VCR with a
New TV
Perform the following operation steps exactly as described to
ensure that the Preset Download function works correctly.
First of all, make sure that the VCR is switched off.
√
1 Switch the TV on.
The TV starts to tune all available TV stations and to
adjust the clock.
(This is called Auto Setup function.)
When the TV has finished its
√
own auto setup, the VCR is
automatically switched on, and
the downloading of the setup
data from the TV to the VCR
starts. (Applicable to TVs with
"Q Link" or "DATA LOGIC"
function)
If your TV is equipped with the "Easy Link", "Megalogic"
or "SMARTLINK" function, the Country setting menu
appears on the TV screen before downloading.
Press the Cursor buttons
(3421) to select the
desired country. Then, press the
OK button and the
downloading automatically starts.
The VCR's Auto Setup
√
(Downloading) is complete
when the programme
position and the current
time appear in the VCR
display.
Note:
≥ If you accidentally switch on the VCR before the TV,
downloading of the setup data from the TV may not be
performed correctly. In this case, follow the operation steps
below.
1 Wait until the Auto Setup is complete on both the TV and
the VCR.
2 Press the MENU button
menu on the TV screen.
3 Press the Cursor buttons (3421)
"Tuning" and then "Download".
4 Press the OK button
data from the TV to the VCR starts.
5 When the programme position and the current time
appear in the VCR display, downloading is complete.
On Screen Display
Download
Download in
progress,
please wait.
Position 67
Indication during downloading
Country
Polska
Deutschland
Россия
Česká Rep.
others
Magyarország
Menu for Country setting
VCR display
SP
CVC
Programme Indication when the
position current time is 16:45
to display the OSD Main
to select
twice. Downloading of the setup
Hint:
≥ If you use a Panasonic TV and perform the operation step
1, starting the downloading of the setup data will
automatically display the "Download" indication. However,
in case of a TV of another make, the "Download" indication
may not appear. In this case, select the AV input on your
TV if you want to see the "Download" indication.
To Set Up this VCR with a TV Already in
Use
1 Switch the TV on.
2 Select the AV input on your TV.
3 Set the VCR/TV switch
4 Press the VCR-ON/OFF button
to switch the VCR on.
Downloading of the setup data
starts automatically. (Applicable
to TVs with "Q Link" or "DATA
LOGIC" function)
If your TV is equipped with the "Easy Link",
"Megalogic"or "SMARTLINK" function, the Country
setting menu appears on the TV screen before
downloading.
Press the Cursor buttons
(3421) to select the
desired country. Then, press the
OK button and the
downloading automatically
starts.
When the programme
√
position and the current time
appear in the VCR display,
the VCR's Auto Setup
(Downloading) is complete.
to "VCR".
Download
Download in
progress,
please wait.
Position 67
Indication during downloading
Country
Deutschland Polska
Česká Rep. Россия
Magyarország others
Menu for Country setting
SP
CVC
Programme Indication when the
position current time is 16:45
11