Setting The Date And Time - Panasonic NV-MX1B Operating Instructions Manual

Setting the Date and Time

If you set [CLOCK SET] on the [OTHER FUNCTIONS] Sub-Menu to [YES], the Menu shown below appears.
MENU
2 1 PUSH W.B/SHUTTER/IRIS/VOL/JOG
For example: To set the clock to 15th October
2000, 14:30.
1
Turn the [PUSH] Dial to set to [2000].
The years change in the following order:
2000 # 2001 #...# 2089 # 2000 #...
2
Press the [PUSH] Dial to select [MONTH],
then turn it to set to [10].
3
Press the [PUSH] Dial to select [DAY], then
turn it to set to [15].
4
Press the [PUSH] Dial to select [HOUR],
then turn it to set to [14].
5
Press the [PUSH] Dial to select [MIN.], then
turn it to set to [30].
6
Press the [MENU] Button to finish the date
and time setting.
The operation of the clock starts from
[00] seconds.
Pressing the button one more time makes
the Menu disappear.
22
CLOCK SET
YEAR 2000
MONTH 10
DAY 15
HOUR 14
MIN. 30
PRESS MENU TO RETURN
≥As the time of the Movie Camera's built-in clock
is subject to a slight imprecision, be sure to
check the time before recording. If the flashing
[0] Indication appears, charge the built-in
lithium battery and set the date and time again.
≥The clock employs the 24-hour system.
∫ Charging the Built-in Lithium Battery
The built-in lithium battery maintains the operation
of the clock. When the [0] Indication appears,
the built-in lithium battery is discharged. Charge
the discharged battery in the following way and
after charging is finished, set the date and time.
1
Connect the AC Adaptor to the Movie
Camera and to an AC mains socket. (p. 8)
2
Leave the Movie Camera turned off.
3
Leave the Movie Camera in this condition
for approximately 4 hours.
After charging for 4 hours, the built-in lithium
battery can power the clock for approximately
3 months.
Information for your safety
WARNING
THE LITHIUM BATTERY IN THIS
EQUIPMENT MUST ONLY BE REPLACED
BY QUALIFIED PERSONNEL. WHEN
NECESSARY, CONTACT YOUR LOCAL
PANASONIC SUPPLIER.
23