After Use; Playing Back On A Tv - Panasonic NV-MX1B Operating Instructions Manual

Digital video camera model no. nv-mx1b; nv-mx5b; nv-mx7b
Hide thumbs Also See for NV-MX1B:
Table of Contents

Advertisement

Title

Playing Back on a TV

By connecting the Movie Camera to a TV, you can
watch playback of the recorded scenes on the TV
screen.

After Use

Attaching the Lens Cap
After use, attach the supplied Lens Cap to the Lens to
protect it.
38
AV IN/OUT
21-pin Adaptor
[AV IN/OUT]
PHONES
[VIDEO IN]
AV Cable
S-VIDEO
IN/OUT
[S-VIDEO IN/OUT]
S-Video Cable
Procedure
1
Connect the [AV IN/OUT] Socket on the Movie
Camera with the Video and Audio Input Sockets on
the TV.
≥Use the AV Cable to connect to the TV.
If your TV is equipped with an S-Video Socket, also
connect the S-Video Cable.
1
2
Take out the cassette.
Set the [OFF/ON/MODE]
(p. 12)
Switch to [OFF].
OPEN / EJECT
Listening to the Playback Sound via
Headphones
If you want to use headphones to listen to the
playback sound, connect headphones to the
[PHONES] Socket on the Movie Camera. In this
case, no sound (including beep and shutter click
sounds) is reproduced from the Movie Camera's
built-in speaker.
≥Set [AV JACK] on the [AV IN/OUT SETUP] Sub-
Menu to [OUT/PHONES]. If you set [AV JACK] to
[IN/OUT], the right channel sound alone will no
[S-VIDEO IN]
longer be heard. (NV-MX7 only)
≥If you want to use headphones to listen to the
playback sound when inputting via the S-Video
Cable, disconnect the cable, set [AV JACK] on
[AUDIO IN]
the [AV IN/OUT SETUP] Sub-Menu to
[OUT/PHONES], and then connect the
headphones. (Otherwise, noise may be heard
in the playback sound.) (NV-MX7 only)
≥When music data is played, the headphones
can be used regardless of this setting.
(NV-MX5, NV-MX7 only)
3
Remove the Battery (p. 11) and retract the
Viewfinder.
MODE
ON
OFF
Making the Indications Appear on the TV
Screen
Press the [OSD] Button
Controller.
The On-Screen Indications also appear on the
TV screen.
1
Remarks, etc.
≥Before connecting, turn off both the Movie Camera
and the TV.
≥If a cassette recorded with copyright protection signal
AV IN/OUT
PHONES
is played back, the screen becomes black. However,
scenes recorded with this Movie Camera do not
contain a copyright protection signal.
≥When inserting a title during playback of the picture
recorded in the Cinema Mode, the display mode will
no longer be automatically identified, and black bars
S-VIDEO
IN/OUT
will appear at the top and bottom of the screen even if
the images are viewed on the wide TV screen.
(NV-MX5, NV-MX7 only)
≥If you set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [IN/OUT] on the NV-MX7, nothing will
appear on the TV screen except during playback.
≥If your TV is not equipped with AV Input Sockets, the
21-pin Adaptor (purchase separately) is necessary.
Consult your dealer.
Selecting the Sound
The sound can be selected using the [AUDIO OUT]
setting on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo sound (main sound and sub sound)
The setting is usually kept at [STEREO].
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If an attempt was made to perform audio dubbing for
what was recorded with [12bit] selected as the
[AUDIO REC] setting, the sound played back will be
BATT.
EJECT
PUSH
set to stereo regardless of the [AUDIO OUT] setting if
[12bit AUDIO] is set to [MIX].
1
on the Remote
VIDEO CAMERA
START/
DATE/
PHOTO
STOP
OSD
TIME
SHOT
COUNTER
RESET
TITLE
ZOOM
T
MULTI
REC
A.DUB
P-IN-P
¥
V
/REW
PLAY
FF/
W
W
6
1
5
STILL ADV
PAUSE
STILL ADV
E
;
D
INDEX
STOP
INDEX
:
9
SELECT
VAR.
P.B.
SEARCH
ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv-mx5bNv-mx7b

Table of Contents