Inserting Titles - Panasonic NV-MX1B Operating Instructions Manual

STILL
PHOTO
SHOT
TAPE CARD
2 1 PUSH W.B/SHUTTER/IRIS/VOL/JOG
Title

Inserting Titles

The supplied MultiMediaCard contains titles (preset
titles). Titles can be selected from among these titles
and displayed. (Titles can be displayed in the Camera
Mode, VCR Mode or Card Playback Mode.)
TITLE
PRE00002.TTL
1 2
1
Lock Setting Display (p. 98)
2
File Name
72
TITLE MULTI/P-IN-P
r
Procedure
1 2
Press the [TITLE] Press the [MULTI]
Button. Button.
The original title (p. 92) A list of the titles is
created last is displayed. displayed.
≥If an original title has
not been created, a
preset title will be
displayed.
TITLE
5
Select the recording destination with the
[TAPE/CARD] Selector.
Camera Mode: TAPE or CARD
VCR Mode: CARD
Card Playback Mode: TAPE
TAPE CARD
3
Turn the [PUSH] Dial
and select the desired
title.
The selected title is
marked with a red frame.
MULTI/P-IN-P 2 1
6
Press the [PHOTO
SHOT] Button.
≥A still picture with the title
inserted is recorded.
≥When you record to
cassette in Camera
Mode, you can use the
Recording Start/Stop
Button instead of
[PHOTO SHOT] Button.
PHOTO
SHOT
Remarks, etc.
4
≥It is recommended that you press the [STILL] Button
first and then press the [PHOTO SHOT] Button.
≥When the [PHOTO SHOT] Button is pressed, the title
Press the [PUSH] Dial
is cleared in that instant, however this will not
or press the [MULTI]
interfere with the recording.
Button.
≥When a title is displayed in the VCR Mode, the title
The selected title
will not be output from the DV Terminal (p. 6) or
appears.
Digital Still Picture Terminal. (p. 7)
≥The Multi-Picture Mode cannot be used once titles
are inserterd.
≥Titles cannot be displayed when [1200k900] has
been selected as the [PICTURE SIZE] setting while
2 1
the [TAPE/CARD] Selector is at [CARD].
or
MULTI/P-IN-P
Clearing the Title
Display
Press the [TITLE] Button.
TITLE
73