Searching For A Scene That You Want To Play Back - Panasonic NV-MX1B Operating Instructions Manual

SEARCH
MENU
1
2 1 PUSH W.B/SHUTTER/IRIS/VOL/JOG
Title
Viewing the Just Recorded
Scenes on the Movie Camera
(Playback)
You can play back recorded scenes right after
recording.
Searching for a Scene That You
Want to Play Back
34
Search Lock Function
For longer Cue or Review Playback, press the
Cue Button [5] or the Review Button [6]
only briefly. As this locks the search function,
you do not need to keep the button pressed for
CAMERA
VCR
a long time.
CARD P.B
≥To resume normal playback, press the Play
Button [1].
≥In Cue and Review Playback, pictures with
fast-moving subjects may contain mosaic-like
MODE patterns.
ON
OFF
Hyper Check Function
≥If you press the Fast-forward Button [5]
during fast-forwarding of the tape or the
3
Rewind Button [6] during rewinding of the
tape, Cue Playback or Review Playback
continues for as long as you keep the button
pressed.
≥At the beginning and end of Cue Playback or
Review Playback, some momentary picture
distortion may occur.
Procedure
1 2
Slide the Press the Rewind
[OFF/ON/MODE] Switch Button [6] to rewind
from the [ON] position the tape.
to put the Movie ≥Rewind the tape to the
Camera in the VCR point where the
Mode. recording started.
The [VCR] Lamp lights. ≥If the tape reaches the
beginning during
CAMERA
rewinding, it
VCR
automatically stops.
CARD P.B
MODE
ON
OFF
Cue Playback Review Playback
Keep the Cue Button Keep the Review Button
[5] pressed during [6] pressed during
playback. playback.
SEARCH
%
¥ Adjusting the Sound Volume
Keep the [PUSH] Dial 1
2
Indication appears. Then, turn the [PUSH] Dial to
adjust the volume. After adjusting, press the [PUSH]
Dial to make the [VOLUME] Indication disappear.
To adjust the volume with the Remote Controller,
press the [T] or [W] Button to make the [VOLUME]
Indication appear. You can then increase the volume
by pressing the [T] Button or decrease it by pressing
the [W] Button. A few seconds after finishing the
adjustment, the [VOLUME] Indication disappears.
≥The output volume from the built-in speaker
[PHONES] socket is adjusted.
≥When using the Playback
Zoom Function, it is not
possible to adjust the
sound volume.
≥If a cassette recorded with
copyright protection signal
is played back, the screen
becomes black.
3
Press the Play Button
[1] to start playback.
SEARCH
!
SEARCH
Variable Speed Search Function
It is possible to change the speed of Cue Playback or
Review Playback.
1
Press the Play
Button [1] during
playback.
SEARCH
SEARCH
&
1k%
Making the Date/Time
pressed until the [VOLUME]
Indication Appear
This Movie Camera
automatically records the
date and time, however
not directly in the picture
but as part of the sub
code. (p. 120)
To make the Date/Time
Indication appear, set
[DATE/TIME] on the
3 and
[DISPLAY SETUP] Sub-
Menu to the desired
setting.
It is also possible to make
the Date/Time Indication
appear and change it by
repeatedly pressing the
2
[DATE/TIME] Button on
the Remote Controller.
(p. 104)
Remarks, etc.
4
Repeat Playback
If you keep the Play Button [1] pressed for more than
5 seconds, the Movie Camera switches over to the
To stop playback:
Repeat Playback Mode and the [R !] Indication
Press the Stop Button
appears. (To cancel the Repeat Playback Mode, set
[∫].
the [OFF/ON/MODE] Switch to [OFF].)
SEARCH
Returning to Normal
Playback
Press the Play Button
[1].
2
Turn the [PUSH] Playback continues at
Dial to select the normal speed.
desired search
speed.
2 1
SEARCH
12:00:00
15.10.2000
15.10.2000
≥The Variable Speed
Search Function offers
the following 6 different
playback speeds both in
forward and reverse
directions: 1/5k (slow
playback in SP Mode
only), 1/3k (slow
playback in LP Mode
only), 1k, 2k, 5k, 10k,
20k
≥During Variable Speed
Search Function,
mosaic-like patterns
appear in the picture.
≥When using the
Variable Speed Search
Function, the sound is
muted.
35