Recording With Showview - Panasonic NV-HV66 EG Operating Instructions Manual

Recording with ShowView

ShowView
8 3 5 4 2 - - - -
: enter ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER : access
0 - 9
EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT
: correct : exit
Timer recording
Pos Date Start Stop
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP OFF
- - - - - - - -/ - - - -:- - - -:- - - - - -
- - - - - - - -/ - - - -:- - - -:- - - - - -
- - - - - - - -/ - - - -:- - - -:- - - - - -
: select ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER access
:
: delete EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT : exit
CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL
ShowView
is a trademark of Gemstar Development
Corporation. The ShowView system is
manufactured under licence from
Gemstar Development Corporation.
20
ShowView
Programming recordings with the ShowView function
The ShowView code simplifies entering programme information to record
TV and SAT programmes.
Press ShowView.
Enter the ShowView number ( to correct entry).
Confirm entry with ENTER.
The Timer recording screen appears.
If the device fails to recognise the TV station automatically, it must be
1/3
entered manually with
VPS
PDC
not have to be entered again.
Activating timer mode
Press TIMER to activate the timer mode.
The
Modifying programmed data
Press PROG/CHECK,
the Timer recording menu appears.
With
Select station
Then enter start and stop time
Select tape speed: A (Automatic), SP, LP, EP
TIMER
with ENTER.
Press TIMER to activate the VCR's timer mode.
. The VCR will store this information so it will
symbol appears on the VCR display.
select the entry to be modified, confirm with ENTER.
and use to set date, week or weekday
, .
, .
, and confirm