Recording With External Recording Controls - Panasonic NV-HV66 EG Operating Instructions Manual

Recording with external
recording controls
Others 2 / 2
EXT LINK : 2
: select
MENU EXIT
: return : exit
Press MENU, the Menu screen appears.
With select menu Others
and confirm with ENTER.
With select EXT LINK and turn to
[2] or [1] .
Press MENU to return to the Menu screen.
EXT LINK 2: External recording control for some
satellite or digital receivers (video signal).
EXT LINK 1: For digital receivers transmitting a
special recording control signal, e.g. the F.U.N.
receiver (TU-DSF41).
EXT LINK
Press EXT LINK to activate the VCR´s recording stand-by mode.
Make sure the VCR´s EL1 or EL2 display appears.
As long as the satellite or digital receiver transmits the special recording
signal (EL1), or a video picture is transmitted (EL2), the VCR will continue
to record.
The following screen will be shown
if you select EXT LINK: [2]:
Press ENTER to hide this message.
Press EXT LINK to stop recording.
Be sure that the timer programmes stored by your VCR do not overlap with
the ones of the satellite or digital receiver.
Quitting recording stand-by mode
Press EXT LINK to quit recording stand-by mode.
The EL1 or EL2 display disappears.
You can now play back a cassette or make a manual recording. You must
press EXT LINK again to reactivate the recording stand-by mode.
VCR
Receiver
EXT LINK recording in progress
ENTER : yes EXT LINK : cancel
Aerial
TV
21