Table of Contents
Related Manuals for Panasonic NV-HV62PX
Summary of Contents for Panasonic NV-HV62PX
-
Page 1: Table Of Contents
Operating Instructions Video Cassette Recorder Model No. NV-HV62PX Contents Page Warning and Important Information Controls and Components Connections Tuning the TV to Your VCR Storing TV Broadcasts in Your VCR Setting the Clock of Your VCR Settings Using the On Screen Display... -
Page 2: Warning And Important Information
Plus, [Alumina] Head Cleaner further enhanced cleaning such as a book case or similar unit. efficiency. • Based on in-house tests with Panasonic video cassettes. WARNING: Actual head life may vary according to conditions of use, To reduce the risk of fire, electric shock or product tape type, temperature, humidity, etc. -
Page 3: Controls And Components
Controls and Components (16) (20) (34) (17) (18) (19) REC/OTR TIMER REC STOP/EJECT PLAY TRACKING/V-LOCK AV 2 VIDEO IN L–AUDIO IN–R (20) (35) (36) (37) (38) (39) (14) (40) (8) (10)(27) -/- - (37) A CANCEL INPUT SEL AUDIO PROG PLAY (21) (22) TIMER... -
Page 4: Connections
Notes: (6) AC Input socket (41) (1) Aerial (Not supplied) • If you are using a Panasonic TV, this setting has already ¢ To mains supply (2) TV Set (Not supplied) been made, and so you do not need to perform the above... -
Page 5: Tuning The Tv To Your Vcr
If Auto Tuning stops halfway by turning the VCR off or a picture on the TV displays this pattern. power failure, Or if the VCR is turned on without the aerial connected Panasonic VCR and all channels are skipped: 1 Disconnect the mains lead and then reconnect it. RF SELECT... - Page 6 Auto Tuning Using the On Screen Display Manual Tuning Procedure The VCR is tuned automatically by Plug in Auto Tuning. If the VCR is not correctly tuned by Auto Tuning, follow the However, Auto Tuning using the On Screen Display should be procedure below.
-
Page 7: Setting The Clock Of Your Vcr
Setting the Clock of Your VCR Settings Using the On Screen Display In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock Preparations back up in the event of a power failure can only be •... -
Page 8: Option Setting
4 Tape running display Option Setting Stop, Eject Rewind, Review, Index Search:, MENU OPTION TAPE SELECT AUTO CLOCK SET Jet Search6, NTSC INPUT SELECT AUTO TUNER PRESET NTSC PB SELECT onPALTV SYSTEM JET NAVIGATOR Jet Rewind OPTION DELETE NAVIDATA TAPE REFRESH OSD REC NAVI MEMORY 0 PROG. -
Page 9: Playback
OSD REC: To set the conditions for the OSD Playback Recording function. • Press [2 1] (28) to select [ON] or [OFF]. Preparations • Confirm that the VCR is on. OFF: Initially set at this position. • Confirm that the TV is on and the VCR viewing channel is This setting enables OSD Recording. -
Page 10: Recording
To Play back S-VHS Cassette Tape Recording (SQPB=S-VHS Quasi Playback) It is also possible to play back tapes recorded in the S-VHS Preparations system. • Confirm that the VCR is on. • Some picture noise may occur depending on the type of •... - Page 11 To Display the Approximate Remaining Important Note for the NICAM System When The VCR is switched on, the tuner will automatically Tape Time switch to a NICAM broadcast, if NICAM is being transmitted. The remaining tape time can be displayed in the VCR display. At this time the NICAM signal is transmitted on stereo 1 Select [TAPE SELECT] from the On Screen Display and channels only, since the M1 and M2 formats are not yet...
-
Page 12: Recording From An External Source
Recording from an external source Operations 1 Press [PLAY] (8) to start playback. This function can be used to make up an edited tape from other recordings or video sources. 2 At the point where you want to join a new scene, press A new scene can be added to the end of previous one. -
Page 13: Timer Recording
9 Press [TIMER (REC)] (14) to switch the VCR over to Timer Recording the timer recording standby mode. • When [JET NAVIGATOR] is set to [ON] (see page 8), the [PROGRAMME IS COMPLETE. REMAINING Easy Timer Programming PROGRAMME 49.] message appears. Up to 16 timer programmes, including weekly and daily •... -
Page 14: To Check And Cancel A Timer Programme
Programming a Timer Recording of a TV To delete an I-Timer Programme 1 Press [I-TIMER] (23) then press [34] (28) to select Programme Until its End the timer programme which you want to delete. (Rec Mode Auto Change Function) 2 Press [CANCEL] (5). If the VCR determines that the remaining tape time is •... -
Page 15: Search Functions
To Set the Category Search Functions The category setting allows you to find CATEGORY SETTING what kind of programmes are recorded ≥MOVIE ≥SPORT Jet Navigator by the character and the icon ≥MUSIC ≥CHILD ≥DRAMA ≥NEWS indications. ≥EDUCA ≥OTHER This VCR can display a list of the recorded programmes on ≥DOCUM ≥... -
Page 16: Time Stamp Function
Confirming the cassette which includes a Index signals are automatically recorded in the following cases: programme you want to watch • When you start a recording by pressing [REC] (15) or [REC/ (Jet Navigator Memory) OTR] (39). This allows you to search the cassette which you recorded the •... -
Page 17: Before Requesting Service
• The playback picture is distorted when record the tape in the Before Requesting Service EP mode using MESECAM system. #However, this is not a malfunction. #We recommend PAL system for recording in the EP mode. Message of On Screen Display Recording will not operate correctly The error message is indicated in brackets [ The symptom description is indicated in brackets [... -
Page 18: Adjusting The Playback Picture
Crystal View Control The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. Adjusting the Playback Picture Under normal conditions, the VCR automatically adjusts the playback picture for optimum quality. However, in some cases it may be necessary to adjust it manually. -
Page 19: Specifications
Specifications NV-HV62PX Power Source: 110–240 V AC 50/60 Hz Power Consumption: 13 W Video Recording System: 2 rotary heads, helical scanning system Video Heads: 4 heads Audio Heads: 2 heads (Hi-Fi) Tape Speed: SP; 23.39 mm/s LP; 11.7 mm/s EP; 7.8 mm/s NTSC SP;... - Page 20 LSQT0878 Matsushita Electric Industrial Co., Ltd. F0405Ah0 Web Site: http://www.panasonic.co.jp/global/...