Recording With External Recording Controls - Panasonic NV-HV61EB Operating Instructions Manual

Recording with external
recording controls
Receiver
Aerial
VCR
Others
Tape length : AUTO(
AV2 : NORMAL
SQPB : AUTO
OSD : 4:3
VCR display : DIMMED
EXT LINK : 2
: select
: return : exit
MENU EXIT
30
EXT LINK
The AV2 input of this VCR is equipped for use with external equipment having
external timer recording control such as digital satellite receivers. The AV2 input
can be set to EXT LINK 1 or EXT LINK 2 depending on the equipment to be
connected. Fully wired 21-pin scart cable is required. Refer also to the
manufacturer's instruction for the external unit.
Press MENU, the Menu screen appears.
With
TV
With
Press MENU to return to the Menu screen.
EXT LINK 1: The VCR recording start and stop time is controlled by a control
EXT LINK 2: The VCR will start recording when AV2 input detects the video
Press EXT LINK to activate the VCR´s recording stand-by mode.
Make sure the VCR´s EL1 or EL2 display appears.
EXT LINK
As long as the satellite or digital receiver transmits
E-240)
the special recording signal (EL1), or a video picture
is transmitted (EL2), the VCR will continue to record.
The following screen will be shown
if you select [EXT LINK 2]:
Press ENTER to hide this message.
Press EXT LINK to stop recording.
Be sure that the timer programmes stored by your VCR do not overlap with
the ones of the satellite or digital receiver. Some external equipment may not
work with this function, refer to the operating instructions for the external unit.
EXT LINK
Quitting recording stand-by mode
Press EXT LINK to quit recording stand-by mode. The EL1 or EL2 display
disappears.
You can now play back a cassette or make a manual recording. You must
press EXT LINK again to reactivate the recording stand-by mode.
select menu Others and confirm with ENTER.
select [EXT LINK] and turn to [2] or [1]
signal sent via the 21-pin scart cable from the external unit (e.g.
Sky Digibox).
signal and stop recording when the video signal is switched off by
the external unit.
.
EXT LINK recording in progress
ENTER : yes EXT LINK :cancel