Connecting The Charging Cradle (If Included); Setting Up The Handset For Use - Siemens Gigaset AS300 User Manual

Connecting the charging cradle (if included)

If you need to disconnect the plug from the charging cradle,
press the release button

Setting up the handset for use

Inserting the batteries and closing the battery cover
Use only the rechargeable batteries (
Communications GmbH. Never use conventional (non-rechargeable) batteries, as this
could result in significant health risks and damage to property. For example, the outer cas-
ing of the batteries could be destroyed or the batteries could explode. The phone could
also malfunction or be damaged as a result of using batteries that are not of the recom-
mended type.
¤
Insert the batteries the right way
round.
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover, for
instance to replace the batteries, place
your fingertip in the grooved area on the
top of the cover and slide down.
2
1
and disconnect the plug 2.
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
4
¤
Connect the flat plug from the power supply 1.
¤
Plug the mains adapter into the plug socket 2.
¢
page 13) recommended by Gigaset
¤
Slide the battery cover back into the
main casing until it clicks into place.
2
1
+ –