Sharp UX-385 Operation Manual page 84

Printing Lists
Explanation of headings
SENDER/
RECEIVER
PAGES
NOTE
82
The fax number of the other machine involved in the
transaction. In the case of a transmission, the number
dialled appears. In the case of a reception, the
programmed ID of the sending machine appears. If this
machine does not have an ID function, the
communication mode will appear (for example, "G3").
Number of pages transmitted or received.
OK - Transmission/reception was normal.
P.FAIL - A power failure occurred. If you have power and
the problem persists, try a different outlet. If necessary,
have an electrician check your power lines.
JAM - A problem with the paper or original document
occurred. Make sure the paper or document is loaded
properly. Make sure the operation panel is shut securely.
NO PAPER - You ran out of paper during reception.
BUSY - The fax was not sent because the line was busy.
COM.E-0 to COM.E-14 - A telephone line error prevented
the transaction. See Line Error in Chapter 11.
CANCEL - Transmission was cancelled because the
STOP key was pressed, no document was in the feeder,
or the other machine requested transmission using a
function which your fax does not have. If you were
attempting to fax, make sure a document is in the feeder.
If you were receiving, contact the faxing party to see how
they are trying to send to you.