Messages And Signals - Sharp UX-310 Operation Manual

Display Messages

Messages and Signals

Display messages
COVER OPEN
DOCUMENT JAMMED
FILM END
FUNCTION MODE
E
NO DATA
100
The print compartment cover (under the operation
panel) is open. Open the operation panel (grasp the
top and pull toward you), and then press down firmly
on both sides of the print compartment cover to close
it.
The original document is jammed. See the following
section, Clearing Paper Jams.
The imaging film may need replacement. Check the
film and replace if necessary.
The FUNCTION key has been pressed.
Transmission or reception was not successful. Press
STOP to clear the message, and then try again. If the
error persists, see Line Error in Problems and
Solutions in this chapter.
This appears if you attempt to search for an
automatic dialling number when none have been
stored.