Making Copies - Sharp UX-310 Operation Manual

4
Making
Copies
Your fax can also be used to make copies. You can use this function
to make a sample copy of a document before transmitting it to see if
the resolution or contrast needs adjustment.
1
Load the document(s) face down.
(Maximum of 10 pages.)
The display will show:
READY TO SEND
Set the resolution and/or contrast if
desired. (The default setting for
copying is S-FINE.)
2
Press the COPY/HELP key.
Incoming calls during copying
The fax goes into manual reception mode during copying, so if a call
comes in at this time, pick up the handset to answer.
To receive a document, press the START key after copying is
finished. If you want to begin reception immediately, press the STOP
key to stop copying, and then press the START key as soon as the
document has fed out and the fax has returned to standby mode.
RESOLUTION
COPY/HELP
55