Using Tel Mode - Sharp UX-310 Operation Manual

Using TEL Mode

RECEPTION
When the reception mode is set to TEL, you must answer all calls
using the fax machine's handset or an extension phone connected to
the same line.
Answering with the fax's handset
1
Pick up the handset when the machine rings.
2
If you hear a fax tone, wait until the display shows RECEIVING and
then replace the handset.
Beep
Press the
RECEPTION
MODE key until the
arrow in the display
points to TEL.
MODE
RECEIVING
Note: If you have set Option
Setting 15 (Fax signal receive) to
NO, press the START key to
begin reception.
Receiving Documents
TEL FAX
TEL/FAX A.M.
51