Misfeed Removal - Sharp AR-5015 N Operation Manual

SINGLE PASS FEEDER (AR-SP2)

Misfeed removal

A
C
Location A
Feeding roller cover
Location B
Right side cover
Location C
Roller
58
If an original misfeed occurs in the SPF, the copier will
stop and the red indicator which indicates an original
misfeed will blink.
B
Open the feeding roller cover and pull the original gently
1
to the left and out from the document feeder tray. Close
the feeding roller cover.
If the misfed original cannot be removed in step 1, open
2
the right side cover and remove the misfed original.
Close the right side cover.
If the misfed original cannot be removed in steps 1 and
3
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed.
If the misfed original cannot be easily removed from the
exit area, open the front part of the document feeder tray
to remove the original.
Open and close the document feeder cover to cancel the
4
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START ( ) key to resume copying.