Sharp AR-5015 N Operation Manual page 13

Left guide
Front guide
Changing the copy paper size in the tray
Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
Squeeze the lock lever of the front guide and slide the
3
front guide to match the width of the paper.
Move the left guide to the appropriate slot as marked
4
on the tray.
G
A5 copy paper cannot be used in the lower paper tray of AR-5120.
Load copy paper into the tray.
5
Place the appropriate label to indicate the selected
6
paper size into the recess on the right front side of the
paper tray.
Push the paper tray firmly back into the copier.
7
LOADING COPY PAPER
11