Sharp AR-5015 N Operation Manual page 2

CAUTIONS
Follow the cautions below when using this copier.
G
The fusing area is hot. Exercise care in this area when removing misfed paper.
G Do not look directly at the light source. Doing so may damage your eyes.
G
Place the copier on a firm, level surface.
G
Do not install the copier in a humid or dusty location.
G
When the copier is not used for a long time, for example, during prolonged holidays, turn the power
switch off and remove the power cord from the outlet.
G
When moving the copier, be sure to turn the power switch off and remove the power cord from the
outlet.
G
Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may
prevent heat dissipation, damaging the copier.
G
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous laser radiation exposure.
Cautions on laser
Wave length
Pulse times
Output power
785 nm ±10 nm
(8.141 µs ±0.1 µs)/7 mm
0.22 mW ±0.01 mW