Sharp AR-5015 N Operation Manual page 14

LOADING COPY PAPER
12
To set the selected paper size, press the PAPER SIZE
8
ENTER (
G
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators except the START (
indicator will go out.
If copying is being performed, paper size setting cannot
be made .
AR-5120 only Use the TRAY SELECT (
9
the paper tray of which the paper size has been
changed.
G
Each time the TRAY SELECT (
be indicated with a blinking paper feed location indicator.
Use the ORIGINAL SIZE ENTER (
10
the paper size which is set in the paper tray.
G
Each time the ORIGINAL SIZE ENTER (
a paper size will be indicated with a paper size indicator.
Press the START (
11
ENTER (
G
AR-5120 only To change the paper size setting of the other tray,
repeat steps 9 to 10 after pressing the START (
) key.
) key is pressed, a paper tray will
) key and then the PAPER SIZE
) key.
) key
) key to select
) key to select
) key is pressed,
) key.