List Of Key Operator Programs - Sharp AR-235 Operation Manual

LIST OF KEY OPERATOR
PROGRAMS
A complete list of all key operator programs is provided below. These programs can only be accessed
by first entering the key operator code number.
Category Program Name
Function setting Key Operator Number
Change
Exposure Adjust
Limit of Copies
Margin Default
Erase Adjust
Initial Conditions
Stream Feeding
Rotation Copy
Sort Auto Select
Output Trays
Offset Function
Memory for Printer
Toner Save Mode
Function
Changes the key operator code number.
Lightens or darkens copies in the automatic
exposure mode.
Sets the maximum number of copies that can be
selected.
Sets the initial margin shift values.
Sets the initial amount of the erase area.
Sets the copier's initial settings during standby.
Enables the stream feeding mode for copying
from an SPF or RSPF. (This program can be
used only if an optional SPF or RSPF is
installed.)
Enables/disables rotation of original images.
Sets the sort copy as default output mode. (This
program can be used only if an optional SPF or
RSPF is installed.)
Sets the output trays for the copy and printer
modes. (This program can be used only if an
optional finisher or job separator tray kit is
installed.)
Enables/disables the offset function in the output
tray.
Sets the memory assignment used for printer
feature. (This program can be used only if an
optional printer expansion kit is installed.)
Reduces toner consumption.
Page
No.
126
126
126
127
127
127
128
128
129
129
129
130
130
7
121