Setting Time And Date; Setting Clock Time - Medion Remote Control Manual

Univ-FB_MD 81302_UK.fm Seite 9 Montag, 7. August 2006 11:08 11

Setting time and date

In the standard display, the day and time appear in the lower
column.
Press the S (Setup) key briefly to show the date in the lower
column for approx. 30 seconds.

Setting clock time

1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
CODE SETUP
until appears.
2. Press S again briefly to open
SYSTEM SETUP
the .
3. Confirm with OK. The
1
MUTE SETUP
is displayed.
4. Use the arrows to select the
TIME SETUP
and confirm with
OK.
5. The current time format
flashes. Use the arrows to
12
select the or
time format ) and confirm with
OK (see the end of the section).
6. The hour display flashes. Use
the arrows to select
hour and confirm by pressing
OK.
7. The minute display flashes.
Use the arrows to select
the number of minutes and
confirm by pressing OK.
SUCCESS
8. The message
appears and the display
CODE SETUP
returns to
12 HR
If you choose format, the
time is displayed with the AM or PM
symbols.
VOL/MUTE SETUP
1. The
Functions („Punch Through")
VOL/
24 HR
the
.
is explained on page 30, Universal
9