Table of Contents
Advertisement
Univ-FB_MD 81302_UK.fm Seite 31 Montag, 7. August 2006 11:08 11
6. .Use a mode key to select the
device type to which the VOL/
MUTE control is to be applied.
PLEASE WAIT
7.
appears again in
the display, followed by the
confirmation message
SUCCESS
.
If you selected the wrong device
that does not have its own volume
control, an error message appears.
Switching off the VOL/MUTE universal function for a
specific device
You can program the universal remote control in such a way
that it will use only that particular device's own VOL/MUTE
functions. The "Punch Through" function for this device is
therefore switched off.
The universal function cannot be switched off for the TV
mode. As described in the previous section, if you have
selected a different mode for the VOL/MUTE universal
function, you will not be able to switch off the universal
function for this mode either.
1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
CODE SETUP
until
appears.
2. Press S again briefly to open
SYSTEM SETUP
.
VOL/MUTE
3. Press OK" The
SETUP
is displayed.
4. Press OK again. The
ALL VOL
SET
menu is displayed.
5. Use the arrows to select
MODE VOL. SET
the
Use this menu to switch off the
VOL/MUTE universal function
for an individual device that you
can select in the next step.
6. Press OK" The
MODE VOL
MODE?
query appears.
7. Use a mode key to select the
device type which should have
its own VOL/MUTE control (not:
TV).
PLEASE WAIT
8.
appears in the
display, followed by the
confirmation message
SUCCESS
.
menu.
31
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Remote Control and is the answer not in the manual?