Set Timer; Tv Sleep-Timer - Medion Remote Control Manual

Univ-FB_MD 81302_UK.fm Seite 21 Montag, 7. August 2006 11:08 11

Set timer

The universal remote control has two timer functions:
a sleep-timer for the TV
(automatic switch off after 1 to
90 minutes);
"Zzz" appears in the display:
four additional times for
customisable commands (e.g.
switching to another
programme); the bell symbol
appears in the display.

TV sleep-timer

Set sleep-timer
1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
CODE SETUP
until appears.
2. Press S briefly twice more to
TIMER SETUP
open .
TV SLEEP
3. Press OK" The
SETUP
menu is displayed.
TV SLEEP SET
4. Press OK" The
display appears.
5. Press OK" The number of
minutes flash in the display.
6. Use the arrows
the time after which the TV
device should switch itself off
automatically.
SUCCESS
7. Press OK" The
confirmation message appears
along with the TV timer symbol
"Zzz".
8. Lay the universal remote control down so that it is
pointing towards the device and is not obstructed.
Switch off sleep-timer
If a sleep-timer is on ("Zzz" appears in the display)
CLEAR
appears in the display instead of
you perform the steps described above.
1. Perform steps 1 to 4 as
described above. The
SLEEP CLEAR
display appears.
2. Press OK" The message
CONFIRM CLEAR
is displayed.
SUCCESS
3. Press OK" The
confirmation message appears.
to enter
TV SLEEP
TV SLEEP SET
TV
21
when