Operation On A Pabx - Gigaset 5010 Instructions Manual

Locking/unlocking the
telephone
When the telephone is locked,
except for a saved emergency
number (see "Saving/deleting
an emergency number") no
numbers can be dialled;
incoming calls can be
answered.
c?8
Lift handset,
select function.
1 0
/ 1: Lock, 0: Unlock.
?a
Press Set key and
replace handset.
Temporarily suspending the
lock for 1 call
c?82?
Lift handset,
select function.
o
Dial number.
a
Replace handset
after the call.
After replacing the handset
the lock is active again.

Operation on a PABX

Deleting/entering the
external line prefix
When operating the tele-
phone on a private PABX, you
may need to save a one or
two-digit external line prefix.
A maximum of 3 external line
prefixes are possible. When
saving the external line prefix,
a dialling pause is
automatically set.
c?0;
Lift handset,
select function,
press last number
redial key.
◆
Deleting all external line
prefixes:
?a
Press Set key and
replace handset.
◆
Entering an external line
prefix:
o
Enter one or max.
three-digit exter-
nal line prefix.
◆
To enter an additional
external line prefix:
5
EN
; o
?a
Changing the dialling
mode
c?#
1 2
/
?a
Changing dialling mode
during a call
If your telephone is set to
pulse dialling and you want to
use functions that require
tone dialling (e.g. remote
access to an answering
machine), you can change the
dialling mode during a call.
*
o
After replacing the handset,
the telephone reverts to the
original dialling mode.
Enquiry/forwarding on a
PABX
>
The subsequent procedure
depends on your PABX.
Setting the flash time
(interruption) for the recall
key
By default, the recall key is
preset to a flash time of 90 ms
for use of new features on
public telephone systems.
On a PABX, it may be neces-
sary to change the flash time
(e.g. 600 ms). To do this,
please refer to the operating
instructions for your PABX.
Press last number
redial key, enter
next prefix.
Press Set key and
replace handset.
Lift handset,
select function.
1: Tone dialling
2: Pulse dialling
without flash
function (i.e. the
recall key has no
function).
Press Set key and
replace handset.
When connected:
Press asterisk key.
The dialling mode
is changed.
Enter digits for
remote control/
data transfer.
During a call: Press
recall key.