When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
Depending on the service provider,
you can create groups with this ser-
vice. These can have access to inter-
nal (company) information, for ex-
ample, or special tariffs apply. The
details can be clarified with your
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
If activated, calls may only be made
within this standard user group
(depending on the network