Table of Contents
Advertisement
Connecting the handset with the network
Recording general SIP access data
If your SIP provider is not included in the
provider list (page 18), you have the fol-
lowing options:
u
Download a configuration file with the
general SIP access data onto your PC
from the Internet.
You can find additional SIP provider
files on the Siemens website at
www.siemens.com/gigasetcustomer-
care. Please only use files from this
website. They have been tested, i.e. the
access data is complete and correct for
the respective SIP provider.
You can import this file onto your hand-
set using the Web configurator
(page 87). The provider is copied into
the list of providers.
You can then complete the SIP settings
either on your handset (page 59) or on
your PC using the Web configurator
(page 94).
u
If there is no configuration file for your
SIP provider, you must enter all the SIP
access data manually via the Web con-
figurator - your personal data and the
general data (page 95). For more infor-
mation on how to do this, please also
refer to the Web configurator Help.
Notes:
– You can edit/change the WLAN/SIP settings
saved in the access profile at any time. You
can make these changes directly on the
handset (page 61) or on your PC (page 90).
– To register with different access points and/
or with other SIP accounts, you can create
up to 16 different access profiles, save
them on the handset and activate them as
required (page 64, page 90).
– To find out how to register with the Web
configurator, see page 75.
– You can find out the IP address of the hand-
¢
¢
set via v
Ð
20
Status.
Advertisement
Table of Contents
