Displaying The Caller's Number (Clip); Activating/Deactivating The Key Lock - Siemens Gigaset 200 User Giude

Displaying the caller's number (CLIP)

The prerequisites for this function are as follows:
G
You must have applied for CLIP from your network
provider.
G
The network provider must support call number
display (CLIP).
G
The call number must be transmitted when the
caller calls.
When a call is made,
the call number
appears on the display
(example).
8
If the call number consists of more than
twelve digits, an omission mark appears at
the beginning of the line (
If the call number is not displayed, the following 
appear:

Activating/deactivating the key lock

If you "lock" the keys, any inadvertent touching of the
keys remains without effect. In order to answer an
!
incoming call, press the off-hook key
* Acknowledgment tone = ascending sequence of
tones
Error tone = descending sequence of tones
If you have not applied for CLIP .
If the display of the number is "sup-
pressed" by the caller or if the caller has
not applied for call number transmission.
To activate the lock, hold down
the key – you will here an
acknowledgment tone
symbol appears on the display.
To deactivate the lock, hold down
the
The symbol disappears.
 
--
3
key again.
- -
).
.
*
. The

11