Pulse/No-Pulse Ratio; Deactivating And Reactivating Automatic Attenuation Equalization - Siemens Gigaset 200 User Giude

Pulse/no-pulse ratio

This function changes the pulse/no-pulse ratio (for
pulse signaling).
3
3
PULSE PAUSE
2 - 1

Deactivating and reactivating automatic
attenuation equalization
If a device is delivered with automatic attenuation
equalization, automatic attenuation equalization is
always activated on delivery and should (normally)
remain activated.
Automatic attenuation equalization can be deactivated
in the following exceptional case: when your base
unit is connected to a telephone system.
3
AGC
AGC OFF
3
or
 AGC ON
Factory defaults of the base unit:
Function
Signaling method
Flash time
* Not available in all countries
20
Press the off-hook key.
Open the menu.
Select and confirm.
Select and confirm the desired
pulse/no-pulse ratio.
Press the on-hook key.
Press the off-hook key.
Open the menu.
Select and confirm.
Select and confirm.
Select and confirm.
Press the on-hook key.
Factory default
Multifrequency signaling
IRL: 120 ms
UK: 100 ms
*