Setting Up The System; System Position - MAXDATA Fusion 6000 System Manual

1 Setting up the system

System position

Please take note of the following criteria for creating a practical and safe workplace when
setting up your computer:
The system can be used anywhere the temperature is suitable for people. However, rooms
with humidity over 70%, and dusty or dirty areas are not appropriate. In addition, do not
expose the system to any temperatures over +35°C or under +10°C.
Make sure that the cables connecting the system to peripheral devices are not tight.
Make sure that all power and connection cables are positioned so that they are not trip
hazards.
When you save data to your system's hard disks or to a floppy disk, they are stored as
magnetic information on the media. Make sure that they are not damaged by magnetic or
electromagnetic fields.
Because the electronics in your computer can be damaged by jarring, no mechanical devices
should be placed on the same surface as the system. This is especially important for impact
printers whose vibrations could damage the hard disk.
ATTENTION
In order to fully separate the system from current, the power cord must be removed from
the wall outlet
MAXDATA Fusion 6000 7