Table of Contents
Advertisement
Base settings
Registering the handset
You can operate your handset at up to 4 base stations.
For information on registering at non-Siemens GAP base
stations, see the relevant base station operating instruc-
tions.
• To prepare the base station, see page 10.
• Enter the following in the handset within one minute:
System PIN
Additional base settings
All other base settings begin as follows:
You can change the base name, e.g.
this case, "3" is the handset's internal number.
Name
24
Press the menu key.
Select
Open the supplementary menu.
Select
Enter the base station's system PIN
(factory setting: 0000) and confirm.
Press the menu key.
Select
Select the base and open the supplemen-
tary menu.
Select the required function:
Select
(Change Base Name).
Enter the required name.
For information on entering the name,
see page 15.
Select
.
.
.
to
.
; in
Advertisement
Table of Contents
