Connecting The Base Station To A Pabx; Dialling Mode And Flash Time - Gigaset 4015 Comfort Operating Instructions Manual

Press keys:
D
åååååååååååååååååååååååååååååååå
Base Settings
D
åååååååååååååååååååååååååååååååå
Add. Features
åååååååååååååååååååååååååååååååå
Dialling Mode
DE
D
åååååååååååååååååååååååååååååååå
Base Settings
D
åååååååååååååååååååååååååååååååå
Add. Features
D
åååååååååååååååååååååååååååååååå
TBR
DE
Connecting the base station to
a PABX
Some telephone systems do not support the CLIP
function and therefore also do not allow SMS messag-
es to be sent or received.
See the operating instructions for the telephone
system.

Dialling mode and flash time

Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling (DTMF dual-
tone multifrequency). Please refer to the operating
instructions for your PABX.
Options:
– Tone dialling (DTMF)
– Dial pulsing (DP)
©
Open the menu.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite: your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
PABX.
©
Open the menu.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
.
600 ms

Connecting the base station to a PABX

97