Replacing The Door Seal - Siemens HB 550 Series Instruction Manual

Replacing the glass cover
Replacing the door
seal
36
5.
Refit the glass cover.
Insert the glass cover on one side and press firmly
on the other side. The glass cover will now click
into place.
6.
Remove the tea towel.
7.
Switch on the fuse again and reset the time.
If the glass cover of the oven light is damaged, it
must be replaced. Replacement glass covers can be
obtained from the after sales service. Please specify
the E number and FD number of your appliance.
The door seal must be replaced if it becomes defec
tive in any way. The replacement part can be obtained
from your local customer service centre. Always make
sure that you give the E number and the FD number
when ordering.
1.
Open the oven door.
2.
Remove the old door seal.
3.
6 hooks are attached to the door seal. Attach the
new door seal to these hooks on the inside of the
oven door and press into position.
Note: The impact point of the door seal must be in the
middle at the bottom of the door.