Table of Contents
Advertisement
Polaroid
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
45
A.·MEDIA LOADING ORIENTATION
B.·SMART CARD CONTACT STATION INTERFACE
DB - 9
SMART CARD
PINS
CONTACT POINTS
1
CI (VCC)
2
C2 (Reset)
3
C3 (Clock)
4
C4 (RFU)
5
C5 (GND)
Refer to the Card Printer Programmer's Manual for complete
programming information.
DO NOT position printing over the Smart Card
Chip.
P100i
User's Manual
Position the cards with the Smart Card Chip
at the top of the card and towards the
printer.
When a command to the parallel or USB
printer interface sends a card to the Smart
Card Contact Station, the printer connects
the Smart Card Contact Station to the female
DB-9 connector on the rear of the printer.
An
attached
external
Programmer can be used to program Smart
card chips.
DB - 9
SMART CARD
PINS
CONTACT POINTS
6
7
8
9
(GND when chip is at station)
Smart
Card
C6 (Vpp)
C7 (I/O)
C8 (RFU)
Advertisement
Table of Contents
Troubleshooting
