Polaroid P100I User Manual page 39

Polaroid
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
31
SCREEN MESSAGE
PRINTING BLACK
A monochrome panel is
being printed.
PRINTING VARNISH
The overlay is printing
A hologram overlay is being
PRINT HOLOGRAM
printed
CLEAN PRINTER The printing is prompting
operator maintenance
The printing is prompting
CLEAN MAG HEAD
operator maintenance
The printing is performing an
CLEANING
internal cleaning routine
REMOVE RIBBON The ribbon has not been
removed while the cleaning
operation is in progress
OUT OF RIBBON
The printer ribbon has run out
The printer has an error moving
MECHANICAL ERROR
the card internally
The card feeder is empty
OUT OF CARD
The cover is open
COVER OPEN
The print head is not locked into
HEAD OPEN
position
COMMAND ERROR
The data being sent from the
host is not recognized
PARAMETERS ERROR
The features of the card are not
recognized
P100i
User's Manual
MEANING
Carry out the cleaning
procedure as detailed in
section 4 of this manual
Carry out the cleaning
procedure as detailed in
section 4 of this manual
Remove ribbon
Replace printer ribbon
Remove the jammed card.
Ensure the card is not out of
specification
Add more cards or adjust the
card feeder to accept the
cards
Close the cover
Lock the print head in its
lower position
Check that the data is
suitable for printing. Try
reprinting a card from known
"good" data
Check the Windows driver
options and printer type
ACTION