Polaroid P100I User Manual page 14

Polaroid
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
6
ETHERNET
The following shows the function of the switch and indicators
found on P100i Printers that use Ethernet Computer Interfaces.
INDICATORS
LED Action
Red Flashing
Red Solid > 30 sec
Red/Green Flashing Alternately
Green Solid > 30 sec
Green Rapid Flashing (9/sec) Network not Found
Green Slowly Flashing (1/sec) Print Job in Progress
Press the Ethernet Push button with the printer ON to to get a
ETHERNET
Test Card.
PUSH BUTTON
Press and hold the Switch while turning ON the Printer to perform
a RESET.
LEDs
Ethernet Push
You can refer to the ZebraNet® PrintServer II™ for Ethernet
Networks Installation and Operation Guide for details regarding
this interface.
P100i
User's Manual
Status Being Signaled
Power-On Self Testing
Failure of Power-On Tests
Firmware Download mode
Proper Hardware Operation; Network Found
Ethernet Test Card