Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Polaroid ZIP
Summary of Contents for Polaroid ZIP
- Page 1 User’s manual P0LMP01 Android GK07X0000400...
- Page 2 Safety Precautions CAUTION Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. BATTERY WARNINGS 1 Avoid contact with leaking or a damaged battery. 2 Do not short battery terminals.
- Page 3 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 4 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is...
- Page 5 WARNING A violation of labeling regulations can cause serious injury or death. Keep out of direct sunlight and Do not place heavy objects Do not place containers of away from a heat source. on the product. liquid on the product. Do not attempt to disassemble, repair and Do not spray water directly...
-
Page 6: Table Of Contents
Table of Contents 1. Items confirmed before use Components Names of parts Power on/off Charging the battery 2. Application installation Installation in Store Installation with QR Code 3. Cover Open method 4. Inserting printing paper Zink Smart Sheet 5. Description of LED Status Indicators 6. -
Page 7: Items Confirmed Before Use
1. Items confirmed before use Components Printer USB cable for charging Zink photo paper Manual Names of parts... -
Page 8: Power On/Off
Power on/off Press the power button at least 3 seconds. Press the power button for about 3 seconds. Note When you turn on the power, the operating status LED indicator blinks for about 5 seconds. You can print it out when the blinking ends, and the LED is turned on white. -
Page 9: Application Installation
2. Application installation... - Page 10 Description of Settings Details Function Description Auto Exposure Automatic exposure settings Print mode settings Print Mode (Image Full, Paper Full) Auto power off setting (None, 3 minutes, 5 minutes, Auto Power OFF 10 minutes) Device status Device Status (Idle, Busy, Paper Empty, etc.) Battery Battery level Number of...
-
Page 11: Cover Open Method
3. Cover Open method Push Open 4. Inserting printing paper Prepare the blue Smart Sheet and white printing paper after unpacking the photo printing paper pack. Open the top cover and insert the Smart Sheet and printing paper as shown in the figure. Notice Do not open the Cover while printing. -
Page 12: Zink Smart Sheet
Zink Smart Sheet Features Provide optimum image quality correction suitable for each printing paper pack Remove foreign objects from printer head. How to use Eject automatically before printing out the paper in initial output. Poor quality and occurrence of horizontal lines can be improved by repeatedly printing 2 to 3 times. -
Page 13: Description Of Led Status Indicators
5. Description of LED Status Indicators Charging Operating Current Details status status status indicator indicator Turn on the power to print. Wait for print Standby command. Turn off / On automatically after the set time. Charging in The battery is progress being charged. -
Page 14: Product Specifications
6. Product specifications Type Size Paper size 50 x 76 (mm) PNG(2550x3300)JPEG(baseline) Type of supported Within a maximum of 10M Byte image file/size Progressive JPEG not supported Paper used ZINK Paper Paper storage Temperature : 20 ~ 25°C conditions Humidity : 40 ~ 55% RH Product operating Temperature : 5 ~ 40°C conditions... -
Page 15: Items To Check Before Reporting A Malfunction
7. Items to check before reporting a malfunction Problems Checklist Check to see if the battery is The power does charged. not turn on. Reboot the Bluetooth of the phone, or connect directly from the Bluetooth Settings menu. connection is not Try connecting in about 5 established. - Page 16 Polaroid ZIP does not support all mobile phones and may not work properly in certain models. Polaroid ZIP requires iOS 8.0 and higher or Android 6.0 and higher. If Polaroid ZIP does not appear to be working properly even using one of these operating systems, please contact us via our website .
-
Page 17: Warranty Card
Warranty Card Warranty Policy • Warranty If the product fails during normal and proper use within the warranty period, it shall be repaired or exchanged free of charge in accordance with the warranty terms and conditions. This warranty covers the body only, not the components.