4•1 Cleaning System - Polaroid P100I User Manual

Polaroid
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
26
4•1 Cleaning System
Your P100i Printer includes a simple cleaning system using the Pre-
Saturated Cleaning Cards provided. The regular use of these cards will
clean and maintain important parts of your printer: including the Print
Head, and Transport Rollers.
CLEAN
PRINTER
Note: For a printer cleaning prior to the WHEN TO CLEAN signal, press the
Left Panel Button until the LCD screen shows "CLEANING MENU". Press the
right Panel Button to select and one more time again to run the cleaning
process (Repeat first steps 1 & 2 above).
P100i
User's Manual
WHEN TO CLEAN
When LCD screen reports message.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket
to remove ribbon.
Close Print Head bracket.
Close Cover. Remove cards from Card
Feeder.
2. Insert one Pre-Saturated Cleaning Card
(provided) through slot on the side of the Card
Cartridge.
3. Press the right Panel Button for a few
seconds. The card will feed into printer and
carry out the cleaning process. Repeat the
process with a new Cleaning Card if
necessary.
Although the CLEAN PRINTER message is
displayed until the cleaning process has been
performed, the printer will continue to
operate.