Using Several Handsets; Registering Handsets - Gigaset V300AM Setting Up

V300AM / USA EN / A31008-xxxxx-xxxx-x-6019 / registr_sett.fm / 3.1.08

Using several handsets

Using several handsets

Registering handsets

You can register up to a total of six hand-
sets on your base station.
A Verizon V300AM handset can be regis-
tered on up to four base stations.
Automatic registration Verizon
V300AM handset to base station
Important: The handset must not yet be
registered to any base station.
Registering the handset to the Verizon
V300AM base station occurs automati-
cally.
¤
Place the handset in the base with its
display facing outwards.
Registration takes around 1 minute. Dur-
ing this process,
in the display and the name of the base
station flashes, for example
the handset has been registered, its
screen displays its internal number, for
example for internal number 2. The
INT 2
handset is assigned the lowest available
internal number (1-6). If all internal num-
bers 1-6 have been assigned, number 6 is
overwritten, assuming that the handset
with the internal number 6 is in idle sta-
tus.
Note:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset man-
ually.
– You can change the name of the handset
(page 29).
26
Regstr.Procedure appears
1. When
Base
Manual registration Verizon V300AM
handset to base station
You must activate manual registration of
the handset at both the handset and the
base station.
After it has been registered, the handset
returns to idle status. The internal number
of the handset appears in the display, for
example INT 1. If it does not, repeat the
procedure.
On the handset
¢ ¢ ¢
v Ð
Handset
s
Select base station, for exam-
ple Base 1
~
Enter the system PIN of the
base station (the default is
0000) and press
screen will display the
number, for example
On the base station
Within 60 secs. press and hold the regis-
tration/paging key on the base station
(page 3) (approx. 3 secs.).
Registering other handsets
You can register other Verizon handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in the user guide for this par-
ticular handset.
On the base station
¤
Press and hold the registration/paging
key on the base station (page 3)
(approx. 3 secs.).
Register H/Set
and press .
§OK§
. The
§OK§
Base 1.