Pc Health Status Option - MATSONIC MS9027C User Manual

standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system.
Activity of the selected IRQ always awakens the system.
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.

PC Health Status Option

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Shutdown Temperature
CPU Vcore
1.80 V
3.30 V
5.00 V
12.0 V
Voltage Battery
Current System Temp
Current CPU Temp
CPU FAN Speed
Chassis FAN Speed
Power FAN Speed
: Move Enter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
CPU Vcore (CPU core voltage)
Voltage Battery (battery voltage)
Current System Temp (degrees Fahrenheit and Celsius)
Current CPU Temp (degrees Fahrenheit and Celsius)
CPU fan speed (in RPMs)
Chassis FAN Speed (in RPMs)
Power FAN Speed (in RPMs)
PC Health Status
[70°C/140°F]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
43
Item Help
Menu Level