Table of Contents
Advertisement
Pin
Signal Name
1
MICIN
3
MICBIAS
5
SPKOUTR
7
Key
9
SPKOUTL
LUSB1: USB panel connector 2
This USB panel connector which is specially designed for OEM customers con-
nects to the front panel or case USB ports that comply with the OEM
specifications.
Pin
Signal Name
1
USBPWR
3
USBPP2-
5
USBPP2+
7
Key
9
Ground
Note: Please make sure that the USB cable has the same pin assignment as indi-
cated above. A different pin assignment may cause damage or system
hang-up.
WOL1/WOM1: Wake On LAN/Wake On Modem
If you have installed a LAN card, use the cable provided with the card to plug
into the mainboard WOL1 connector. This enables the Wake On LAN (WOL)
feature. When your system is in a power-saving mode, any LAN signal auto-
matically resumes the system. You must enable this item using the Power
Management page of the Setup Utility.
Pin
Signal Name
1
5VSB
2
Ground
3
SENSE
If you have installed a modem, use the cable provided with the modem to plug
into the mainboard WOM1 connector. This enables the Wake On Modem
(WOM) feature. When your system is in a power-saving mode, any modem
signal automatically resumes the system. You must enable this item using the
Power Management page of the Setup Utility. See Chapter 3 for more infor-
mation.
Pin
Signal Name
2
AGND
4
5V
6
XSPKOUTR
8
Empty
10
XSPKOUTL
Pin
Signal Name
2
Ground
4
Key
6
USBPP3+
8
USBPP3-
10
USBPWR2
23
Advertisement
Table of Contents
