MATSONIC MS9158 Series User Manual page 36

Mainboard User's Manual
This sets the timeout for Suspend mode in
Suspend Time
minutes. If the time selected passes without
Out
any system activity, the computer will enter
power-saving Suspend mode.
This item sets up the timeout to power down
Hard Disk
the hard disk drive, if there is no hard disk
Time Out
activity after passing the preset period of
time.
The system can be turned off with a
Resume On
software command. If you enable this item,
RTC Alarm /
the system can automatically resume at a
Date / Hour /
fixed time based on the system's RTC
Minute /
(realtime clock). Use the items below this
Second
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
The system can be turned off with a
LAN/Ring
software command. If you enable this item,
Power On
the system can automatically resume if there
is an incoming call on the Modem. You
must use an ATX power supply in order to
use this feature.
If you enable this item, system can
Keyboard
automatically resume by pressing hot keys
Power On
on the keyboard or typing in the password.
Wake-Up Key
You must enable the Keyboard Power On
Wake-Up
jumper and use an ATX power supply in
Password
order to use this feature.
32