Table of Contents
Advertisement
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03
Basic Operation
Answering a Call
Press the Hands-Free key on the base, or press the Talk/Flash key on
the handset, or pick up the handset from the base (only when set to the
Auto Talk function).
To end a call, press either the Hands-Free key on the base or the End
key on the handset. You may also simply put the handset back on the
base.
Making Calls
Press the Hands-free key on the base or the Talk/Flash key on the
handset, and then enter the phone number. Or enter the phone number,
and then press the Hands-free key on the base or the Talk/Flash key
on the handset.
To end a call, press either the Hands-free key on the base or End key
on the handset. You may also simply put the handset back on the base.
Adjusting Volume
When talking, INT or playing messages, press the Volume + or – key
on the base or the handset to adjust the volume.
In Use / Charge Indicator
When the handset is in use or charging, the "In Use / Charging"
indicator on the base will automatically light. When a call comes in,
the indicator will flash.
Flash Function
Press the Flash key on the base or the Talk/Flash key on the handset
when the handset is picked up. This equals to end a call and redial a
number without hanging up the phone.
Mute Function
When you are talking or intercom over the base or the handset, press
the Mute key, then the other end will not hear you. Press again to
resume talking.
Redial Function
The base and the handset can store 5 sets of phone numbers
respectively; each set can be up to 48 digits.
In Standby, press the Redial key on the base or the handset, you will
see the last number dialed in the display.
Press
or
key on the base or +/- key on the handset to search the
14
Advertisement
Table of Contents
