Table of Contents
Advertisement
A d j u s t i n g t h e L E D d i s p l a y
I n v e r t
To flip the display vertically, press the up-arrow [ ] and down-arrow [ ] keys simultaneously.
A d j u s t i n t e n s i t y
To adjust the display intensity, set
B l a c k o u t
To blackout the display 2 minutes after the last key-press, toggle
P r o t o c o l s e l e c t i o n
The MAC 300 can be controlled with DMX-512 and Martin RS-485 protocol controllers. When used with DMX con-
trollers, there are 4 control protocols to choose from. The control option - DMX mode 1, 2, 3, 4; or Martin - must
match the controller setup.
D M X m o d e s u m m a r y
Mode 1
tracking control
8-bit pan/tilt
9 channels
The DMX modes are summarized above. Mode 4 provides full control; it is recommended unless channels are limited.
To s e l e c t a p r o t o c o l
[Menu]
[ ], [ ]
[Enter]
[ ], [ ]
[Enter]
[ ], [ ]
[Enter]
[Menu]
[Menu]
A u t o m a t i c p r o t o c o l d e t e c t i o n
Automatic protocol detection allows the MAC 300 to detect the controller type - DMX-512 or Martin RS485 - and
respond accordingly. If it is a DMX controller, the MAC 300 uses the control option selected above.
The default setting is
and press [Enter].
PE RS/d INT
Mode 2
tracking control
16-bit pan/tilt
11 channels
Press
As required
Display main menu
As required
Select
Once
Display sub menu
As required
Select
Once
Display currently selected control mode
As required
Select protocol (
Once
Save setting.
Once
Display main menu
Once
Display current address
Table 4: Setting a protocol
OFF
. To turn it on, navigate to the
Fixture Settings
to a level between 10 and 100.
PER S/d ISP
Mode 3
tracking & vector control
8-bit pan/tilt
11 channels
To
PSE T
MOd E
dM X1
,
dMX 2
MOd E
is displayed.
PS ET
sub menu, select
to
O FF
.
Mode 4
tracking & vector control
16-bit pan/tilt
13 channels
,
dMX 3
,
dMX 4
,
M ART )
AUT O
, press [Enter], select
ON
,
11
Hide quick links:
Advertisement
Table of Contents
