Playing A Dvd With Surround Sound; Personalizing Your Sound - Pioneer VSA-AX10I-S Operating Instructions Manual

2 2 2 2 2 Playing a DVD with Surround Sound

1 Make sure the amplifier, your TV, and your DVD player are switched
ON.
2 Press the DVD/LD button on the remote control.
You should see "DVD/LD" in the display on the amplifier.
3 Press the LISTENING CH SELECT button on the remote control
repeatedly until you
To locate the LISTENING CH SELECT button, press the AMP button then press MAIN to access the
main remote control screen.
4 Press the STANDARD button on the remote control for the basic
surround sound setting.
If you don't see the STANDARD button, press the AMP button then press MAIN to access the main
remote control screen.
5 Play a DVD then adjust the MASTER VOLUME.

3 3 3 3 3 Personalizing Your Sound

1 Use the Surround Listening Mode buttons to find the listening mode(s)
that work best for the source material.
For more information see pages 53–57.
To get a more refined sound, make the sound settings in "Expert
2
Setup" (p.89–95).
see "7.1" in the display on the amplifier.
Quick Start Guide Part2
17
En